Follow along as I use the new infusible ink blanks from Cricut.
Cricut has a variety of new infusible ink blanks. Cricut sent me a few samples in order to write this review and promote their new products. The new materials include cosmetic bags, pillow covers, wine bags, and toddler-sized t-shirts. I made my daughter this bag to hold her drawing supplies from the cosmetic bag set.
Links are affiliates and help support this site, thank you for considering to use them.
To begin, I created the graphic I used in Design Space. The following video tutorial shows you how that was done.
Cutting the infusible ink on the Cricut Maker. On the mat, I aligned the cut to the center utilizing the blue and red section of the design.
Then I weeded away the parts I didn’t want.
Placing the infusible ink, if you look closely you will see a slight fold in the bag and the infusible ink. This is a trick I use to align the center of the image and blank.
Using my heating guide, I set my EasyPress and pressed.
The decoupage paper I used was Quite Place. It is a part of the Out in my Garden set from Denise Boddey Designs. The one-sheet covered the entire project and was used in a few different ways. The Quite Place design has a colorful plant design with a subtle overall pattern. The different areas of design were used specifically on the birdhouse. The birdhouse makes a great decorative piece and there is a lot of attention to detail.
To make the leaves have more stability, I covered them in UV resin and cured it. Then I cut out the leaf design and set them aside for later.
Using a Foliage Green colored paint, I covered the birdhouse with a thin coat.
Here is the house painted.
I began to fit the subtle paper design to the sides of the birdhouse using decoupage glue under and over the paper.
Using a matte decoupage glue added a nice sheen to the paper. Trimming the paper to the bottom edge of the birdhouse while the paper was wet left a rough edge which I will hide later.https://googleads.g.doubleclick.net/pagead/ads?client=ca-pub-6266942531963740&output=html&h=280&adk=2591642117&adf=2511820791&w=820&fwrn=4&fwrnh=100&lmt=1600565820&num_ads=1&rafmt=1&armr=3&sem=mc&pwprc=7204917205&psa=1&guci=2.2.0.0.2.2.0.0&ad_type=text_image&format=820×280&url=https%3A%2F%2Ftryit-likeit.com%2Fentries%2Fcreate%2Fhow-to-decoupage-with-denise-boddey-designs&flash=0&fwr=0&pra=3&rh=200&rw=820&rpe=1&resp_fmts=3&wgl=1&fa=27&adsid=NT&dt=1600565816940&bpp=4&bdt=3737&idt=4&shv=r20200915&cbv=r20190131&ptt=9&saldr=aa&abxe=1&cookie=ID%3Db88650c4930810b4%3AT%3D1600562313%3AS%3DALNI_MYOyHc5IyrX5qryugHYUv-oyBB81w&prev_fmts=0x0%2C300x250%2C850x425&nras=2&correlator=8361932644105&frm=20&pv=1&ga_vid=1296732239.1600562314&ga_sid=1600562314&ga_hid=1014777550&ga_fc=1&iag=0&icsg=3421680856727552&dssz=79&mdo=0&mso=0&u_tz=-360&u_his=1&u_java=0&u_h=900&u_w=1600&u_ah=860&u_aw=1600&u_cd=24&u_nplug=3&u_nmime=4&adx=247&ady=5789&biw=1583&bih=708&scr_x=0&scr_y=0&eid=21066705&oid=3&psts=AGkb-H9rQhx7yLhQbBGw4bnH1KqcfqpSZpeuowXTwNUkRnH4OvTA7–HY7wDUhtwKMOh%2CAGkb-H8jo_0ZULvY2WuuQbPcRMuIKEK5-kcH-a9XHPMdvtFt1mcZlvwy-Tew2JSANy_gfMyk6ym3gg&pvsid=962885958521269&pem=299&ref=https%3A%2F%2Ftryit-likeit.com%2Fentries%2Fcreate%3Fpage%3D3&rx=0&eae=0&fc=1408&brdim=0%2C0%2C0%2C0%2C1600%2C0%2C0%2C0%2C1600%2C708&vis=1&rsz=%7C%7Cs%7C&abl=NS&fu=8320&bc=31&ifi=4&uci=a!4&btvi=1&fsb=1&xpc=bt05rBYmeQ&p=https%3A//tryit-likeit.com&dtd=3996
The back of the birdhouse has a nice surprising leaf design.
I added the decorative elements to the front. The resin leaves at the top and a bird sticker at the bottom. In the above photo, you can also see the ribbon wrapped around the bottom. I used decoupage glue for all of these elements.https://googleads.g.doubleclick.net/pagead/ads?client=ca-pub-6266942531963740&output=html&h=280&adk=2591642117&adf=4148038230&w=820&fwrn=4&fwrnh=100&lmt=1600565820&num_ads=1&rafmt=1&armr=3&sem=mc&pwprc=7204917205&psa=1&guci=2.2.0.0.2.2.0.0&ad_type=text_image&format=820×280&url=https%3A%2F%2Ftryit-likeit.com%2Fentries%2Fcreate%2Fhow-to-decoupage-with-denise-boddey-designs&flash=0&fwr=0&pra=3&rh=200&rw=820&rpe=1&resp_fmts=3&wgl=1&fa=27&adsid=NT&dt=1600565816948&bpp=2&bdt=3744&idt=2&shv=r20200915&cbv=r20190131&ptt=9&saldr=aa&abxe=1&cookie=ID%3Db88650c4930810b4%3AT%3D1600562313%3AS%3DALNI_MYOyHc5IyrX5qryugHYUv-oyBB81w&prev_fmts=0x0%2C300x250%2C850x425%2C820x280&nras=3&correlator=8361932644105&frm=20&pv=1&ga_vid=1296732239.1600562314&ga_sid=1600562314&ga_hid=1014777550&ga_fc=1&iag=0&icsg=3421680856727552&dssz=80&mdo=0&mso=0&u_tz=-360&u_his=1&u_java=0&u_h=900&u_w=1600&u_ah=860&u_aw=1600&u_cd=24&u_nplug=3&u_nmime=4&adx=247&ady=7209&biw=1583&bih=708&scr_x=0&scr_y=0&eid=21066705&oid=3&psts=AGkb-H9rQhx7yLhQbBGw4bnH1KqcfqpSZpeuowXTwNUkRnH4OvTA7–HY7wDUhtwKMOh%2CAGkb-H8jo_0ZULvY2WuuQbPcRMuIKEK5-kcH-a9XHPMdvtFt1mcZlvwy-Tew2JSANy_gfMyk6ym3gg&pvsid=962885958521269&pem=299&ref=https%3A%2F%2Ftryit-likeit.com%2Fentries%2Fcreate%3Fpage%3D3&rx=0&eae=0&fc=1408&brdim=0%2C0%2C0%2C0%2C1600%2C0%2C0%2C0%2C1600%2C708&vis=1&rsz=%7C%7Cs%7C&abl=NS&fu=8320&bc=31&ifi=5&uci=a!5&btvi=2&fsb=1&xpc=Hnc6i6kp0J&p=https%3A//tryit-likeit.com&dtd=4006
The chimney and the circled end of the perch are also covered with the designed paper.https://googleads.g.doubleclick.net/pagead/ads?client=ca-pub-6266942531963740&output=html&h=280&adk=2591642117&adf=3562470715&w=820&fwrn=4&fwrnh=100&lmt=1600565820&num_ads=1&rafmt=1&armr=3&sem=mc&pwprc=7204917205&psa=1&guci=2.2.0.0.2.2.0.0&ad_type=text_image&format=820×280&url=https%3A%2F%2Ftryit-likeit.com%2Fentries%2Fcreate%2Fhow-to-decoupage-with-denise-boddey-designs&flash=0&fwr=0&pra=3&rh=200&rw=820&rpe=1&resp_fmts=3&wgl=1&fa=27&adsid=NT&dt=1600565816959&bpp=3&bdt=3755&idt=3&shv=r20200915&cbv=r20190131&ptt=9&saldr=aa&abxe=1&cookie=ID%3Db88650c4930810b4%3AT%3D1600562313%3AS%3DALNI_MYOyHc5IyrX5qryugHYUv-oyBB81w&prev_fmts=0x0%2C300x250%2C850x425%2C820x280%2C820x280&nras=4&correlator=8361932644105&frm=20&pv=1&ga_vid=1296732239.1600562314&ga_sid=1600562314&ga_hid=1014777550&ga_fc=1&iag=0&icsg=3421680856727552&dssz=80&mdo=0&mso=0&u_tz=-360&u_his=1&u_java=0&u_h=900&u_w=1600&u_ah=860&u_aw=1600&u_cd=24&u_nplug=3&u_nmime=4&adx=247&ady=7527&biw=1583&bih=708&scr_x=0&scr_y=0&eid=21066705&oid=3&psts=AGkb-H9rQhx7yLhQbBGw4bnH1KqcfqpSZpeuowXTwNUkRnH4OvTA7–HY7wDUhtwKMOh%2CAGkb-H8jo_0ZULvY2WuuQbPcRMuIKEK5-kcH-a9XHPMdvtFt1mcZlvwy-Tew2JSANy_gfMyk6ym3gg&pvsid=962885958521269&pem=299&ref=https%3A%2F%2Ftryit-likeit.com%2Fentries%2Fcreate%3Fpage%3D3&rx=0&eae=0&fc=1408&brdim=0%2C0%2C0%2C0%2C1600%2C0%2C0%2C0%2C1600%2C708&vis=1&rsz=%7C%7Cs%7C&abl=NS&fu=8320&bc=31&ifi=6&uci=a!6&btvi=3&fsb=1&xpc=QXVFjgGQ3P&p=https%3A//tryit-likeit.com&dtd=4002
I also decoupaged the bottom of the birdhouse, paying attention to details.
For a final touch, the roof was wiped with sparkle paste, I applied this with my fingers for a light coat.
The minute I saw this decanter advertised on the Dollar Tree website, I knew I had to have it. I wanted to etch it with etchall. I love the iridescent quality of the glass. I had a hard time deciding which color decanter to get but ultimately decided upon the purple version. I originally envisioned etching all four sides of the glass, but I ran into a bit of an issue I will explain in detail below.
This post and photos may contain Amazon or other affiliate links. If you purchase something through any link, I may receive a small commission at no extra charge to you. Any supplies used may be given to me free of charge, however, all projects and opinions are my own.
Here is where I ran into a bit of trouble. The first time I etched the decanter it removed the purple iridescent layer. So I used a craft knife to scratch off all the purple from one side of the decanter.
Clean the glass with rubbing alcohol and then adhere the stencil to the glass.
Cover the stencil with etchall etching creme, be generous.
After 15 minutes has passed, remove the excess creme and return it to the container. I used a scrap of cardstock to remove the creme. etchall creme is reusable.
Here is a close-up of the final result. I am happy I resolved my issue and it turned out well!
I have a really fun post and video tutorial on the Rinea blog today making this paper spinner. The bend in the foiled paper catches the wind and causes it to spin. I am a part of the Rinea Design Team and I post tutorials on their blog twice a month. [Wind Spinner]
If you make a purchase on Rinea, Use the following affiliate linking discount code JANETTRIESCHMAN at Rinea for a 10% off savings.
I have a springtime gift tag tutorial up on the ScraPerfect blog today. I am a member of their design team and share posts twice a month. Here is a link to the tutorial: [spring tag] To create the tag I used a number of different products, they are all linked below for your convenience and include affiliate links.
These basic champagne glasses from the Dollar Store were given an upgrade with Etchall Etching Cream and then decorated with Alcohol Inks. They make the perfect pair for celebrating a special occasion or for everyday use. You could change the color combination to suit your needs like school colors for a college graduation party, or for wedding colors.
This post and photos contain affiliate links. If you purchase something through any link, I will receive a small commission at no extra charge to you. Any supplies used may be given to me free of charge, however, all projects and opinions are my own.
To begin, remove any labels and clean the glasses using rubbing alcohol.
Then cover the desired area (the stem) with etchall Etching Creme, wait 15 minutes, remove excess back to the container, and then wash.
The etching is done. The result is very elegant, and you could stop right here.
The alcohol inks I chose to use.
Turn the glass upside down. Drop a small drop of ink at the stem of the glass and let it run down. Continue until you like the look.
Here is an up-close look at the glass. Notice I put a “ring” around the top of the stem in silver.
I purposely didn’t let the ink cover anywhere near the drinking lip of the glasses. I covered them in a plastic bag and taped it in place. Placing it in my spray box, I sprayed it with a sealer and let it dry. (you may need a few light coats)
Remove the taped bag and your glasses are ready to celebrate with!
Recommended etchall Products (affiliate links to Amazon)
Today I have a post on the Rinea blog sharing a video tutorial on my creative process making the mixed media piece above. This piece includes a poem by Maya Angelou the Caged Bird. This month the design team at Rinea is partnering with Creative Embellishments for our posts.
Use the following affiliate linking discount code JANETTRIESCHMAN at Rinea for a 10% off savings.
What the entire process of making polymer clay earrings using mica powder.
This post is a part of the DCC (Designers Craft Connection) Group. We are sharing our favorite materials and products. For me, that was a bit difficult to choose as I like working with a variety of different materials. I ultimately chose to work with polymer clay and making jewelry. It is a material I have worked with for a long time, although I don’t post a lot about it.
This post and photos may contain Amazon or other affiliate links. If you purchase something through any link, I may receive a small commission at no extra charge to you. Any supplies used may be given to me free of charge, however, all projects and opinions are my own.
I am not Irish but when I think of St. Patrick’s Day the first thing that comes to mind is green beer. I guess it is a throwback to my college days. So I created this Happy St. Partick’s Day coaster. The design is more like a seal so it could work well on other substrates like a t-shirt or a tote. The image is a free SVG file so you can download it and resize it however you’d like.
The following links are affiliates. Thank you for considering using them. They help support this site in a small way.
the inked image on the left and the finished coaster on the right
Ready for St. Patrick’s Day and green beer!
I planned on participating in this first SVG blog hop but I got my dates confused, I was sick, and didn’t get my project images submitted on time. But I still want to help promote the hop and all the free SVG files available for St. Patrick’s Day.
As a design team member, I post on the Rinea blog twice a month. Today I have a tutorial showing you how to line an envelope with Rinea Foiled Paper. [tutorial]
Use the following affiliate linking discount code JANETTRIESCHMAN at Rinea for a 10% off savings.
Cutting the infusible ink on the Cricut Maker.
Then I weeded away the parts I didn’t want.
Placing the infusible ink, if you look closely you will see a slight fold in the bag and the infusible ink.
mica on the clay before baking
