jewelry making - Try It - Like It - Create it

Making Jewelry with Felt

Make jewelry with felt beads made from Kunin Felt.

with Kunin Felt

It is time to start your holiday crafting and these pieces of felt jewelry would be perfect for gift giving. Each piece is made with a felt bead. This post will show you the different ways to make felt beads. The pieces above use a spiral bead technique.

I would like to thank Designer Crafts Connection for the opportunity to work with amazing companies and designers. And specifically for this post, I would like to thank Kunin Felt for providing materials used with this project.

Kunin Felt’s manufactured in the US from recycled plastic bottles reclaimed from landfills. It takes 10 bottles to make a pound of fiber. Kunin Felt‘s sold at Michaels under the Creatology Brand, at JoAnn, Walmart, Hobby Lobby, Fabric.com, and Amazon.

Materials:

ruler
marker
felt
beads
jewelry findings and tools
sewing clips
scissors
Fabri-Tac

The image above shows a few different ways to roll into beads. The top bead looks similar to a rose and rolls up with small pieces of felt inserted. This bead is a good way to use up scraps. The other two are spirals using three and two different colors of felt.

Here is another way to use up scraps. This bead uses small pieces of felt stacked together and threaded onto a wire.

Video Tutorial:

Look how nice these look. The staggered pieces add to the shape and interest of the earrings. I have worn these earrings and they are very comfortable and lightweight. Because the felt is so light, I suggest adding beads that have a bit of weight to them. (Oh my gosh, the second ear wire is missing some elements, I am going to have to change that out! I didn’t notice it until writing this post. And as I said, I have worn them out!)

DIY Christmas Tree Earrings

Die cut a pair of Christmas tree earrings using shrink plastic three different ways.

with Scrapbook.com

Fun for the holidays, fun for gift-giving, make a pair of Christmas tree earrings with a die from Scrapbook.com, and shrink film. I’ve shown three different designs all made from the same die. The green earrings are using alcohol ink, the rose gold earrings used a stamp pad, and the silver and black pair were stamped with a rubber stamp.

Many of the items I use in posts are provided by the manufacturers to promote their products.
A special thanks to those brands who sponsor this site. Some links are affiliates, thank you for using them.

To make the earrings I used the smallest die from the Nested Tree Dies and shrink film from Grafix. I used white and silver shrink film.

Materials:

Nested Tree Die
Shrink film – white, silver
CrossOver II
alcohol inks
Rose gold stamp pad
Stazon ink pad
rubber stamp
jewelry making tools and findings
Alcohol ink marker (green)
UV light
UV resin
hole punch
toaster oven

Video Tutorial:

As the film shrinks, the colors become more intense. While there was a pattern on the rose gold trees, it is all but gone once shrunk. However, they did take on a more metallic sheen almost like glitter. Do you have a favorite pair?

Make sure you stop at every crafty post along the way for Christmas magic and inspiration!

1. Jamie Pate
2. Juliana Michaels
3. Marie Nicole
4. Becki Adams
5. Patricia Roebuck
6. Terra O’Brien
7. Amy Mattingly
8. Janet Trieschman
9. Adrienne Boese
10. Amy Brown
11. Kinjal Trivedi
12. Nadine Carlier
13. Erin Reed
14. Anita Trippi
15. Lynda Keyes
16. Lea Lawson

Suggested Materials:

Links are Affiliates
AZ – Amazon, SSS – Simon Says Stamps, SB – Scrapbook, O – Other

Crossover II Shop at: AZ	Grafix Shrink Film Shop at: AZ	Jewelry Tool Kit Shop at: AZ	Nested Tree Die Shop at: SB
Spectrum Noir Markers Shop at: AZ \| SSS \| SB	StazOn Shop at: AZ \| SSS \| SB	UV Light Shop at: AZ	UV Resin Shop at: AZ

How to Make Ribbon Earrings

You are going to love making these earrings from ribbon with Gwen Studios.

With Ribbon from Gwen Studios

Today I am back working with Gwen Studios ribbon as an application to be on their design team. We were asked to make jewelry or home decor and since I had already made a decor piece with ribbon, I chose to make earrings. These ribbon earrings use coordinating ribbons layered together. The fun thing about them is that you can make them at whatever length you want.

I would first like to thank Designer Crafts Connection for the opportunity to work with amazing companies and designers. Specifically for this post, I would like to thank Gwen Studios for providing me with an amazing box of materials to work with.

Materials:

Many of the items I use in my posts are provided by the manufacturers in order to promote their products.
A special thanks to those brands who sponsor this site..

ribbons – Gwen Studios
jewelry making pliers
jewelry findings – ear wires and ribbon ends
scissors
ruler
lighter
adhesive – optional

Gwen Studios products can be found at your local Walmart store.

Directions:

To make the earrings, you want to measure and cut your ribbons into different lengths. Starting with the widest ribbon as the longest. Keep in mind most of the ribbons will be folded in half.

Video Tutorial:

I am a total fan of pink so they were the first pair of earrings I made. Gwen Studios has so many beautiful ribbons I couldn’t stop making only one pair.

Sublimation Earrings

Learn how to DIY your own sublimation earrings. #sponsored @artesprix @oliso

With Artesprix

Recently I was a guest designer at Artesprix. I really enjoyed the process of creating with Sublimation markers. When I saw sublimation earring blanks on Amazon I knew I needed to work with them. This is the first, but not the last, pair of earrings I will be making. I really like the idea of being able to make earrings in colors and designs to match my outfits. These sublimation earring blanks let me do just that. Follow along and learn how to make your own sublimation earrings.

Materials:

Many of the items I use in my posts are provided by the manufacturers in order to promote their products.
A special thanks to those brands who sponsor this site.

Artesprix markers
earring blanks
stamp
Artesprix stamp pad
Artesprix heat tape
Artesprix protective paper
Artesprix project mat
Oliso craft iron
pencil
scissors
rhinestones
super glue
permanent black marker

I chose to work with four of the markers included in the pastel marker set from Artesprix.

After the design is colored in, it is time to prepare the earrings for heat to transfer the design. Don’t forget to peel the protective layer from each side of the earrings before heating. A pin helped me easily remove the film.

It is really important to prepare the layers before applying heat. I have a project mat on my work surface, then a piece of protective paper. The blank with the design taped in place comes next with the colored paper on top. Then finally another piece of protective paper. Now you are ready to apply the heat. If using an iron, the heat tape is really important so the design doesn’t move around.

I added rhinestones to the center of the earrings and colored the edges with a permanent black marker to finish off the design.

Video Tutorial:

Suggested Materials:

Links are Affiliates
AZ – Amazon, O – Other

Westcott 14849 8″ Straight Titanium Bonded Non-Stick Scissors Shop at: AZ	Super Glue Shop at: AZ	Rhinestones Shop at: AZ	Sublimation Earrings Shop at: AZ
Sublimation Ink Pad Shop at: AZ \| O	Pastel Sublimation Markers Shop at: AZ \| O	Protective Paper Shop at: AZ \| O	Heat Resistent Tape Shop at: AZ \| O
Art-c stamp Shop at: AZ	Oliso Mini Iron Shop at: AZ

Tres Jolie Monthly Kit :: Necklace

Working with a kit from Tres Jolie, I made a chipboard gear necklace. I am a guest designer for the month of June. #sponsored

This month I am a guest designer at Tres Jolie Kits. I was sent the Cards, Tags, and More kit. The kit included chipboard gears. I used those to create this chipboard gear necklace.

I used a variety of metallic paints on the gears. To begin I painted one in brown/bronze and the other in silver.

The necklace would be fine in brown and silver but I tend to like a bit more color so I used a blotting technique on the silver painted gear. I also painted the backs of the gears so they would look finished.

After gluing the dried gear pieces together, I added a thin layer of UV Resin. The resin adds a finished glossy look to the piece as well as adding stability.

Wrapping craft wire around the end of my paintbrush made for a bail for the back of the gears.

I Super Glued the bail to the back of the gear pieces that were glued together. In the above photo you can see that back of the piece is painted.

All that is left to do is thread the cord and ribbon necklace through the bail. I toyed with the idea of making this into a pin or a necklace. Obviously I chose the necklace. Which do you think you would choose?

DIY a Dragonfly Pin

Make an adorable dragonfly pin with Denise Boddey Designs. @deniseboddeydesigns #sponsored @DecoArtAcrylicPaints

Follow along as I make this adorable Dragonfly Pin using a chipboard design piece from Denise Boddey Designs. This post is created as a part of the design team and some materials have been provided to use in this post. You can make your pin in different colors if you wish. Make one match a special outfit or for a special occasion. The Dragonfly Pin would also make a great gift or an embellishment for a card or mixed media project.

Since the chipboard is dark, I used white chalk paint to coat the dragonfly. I found it needed two coats to fully cover the piece. Now the colors will show up better.

I used a variety of paint colors and applied them in a dabbing motion. You can see what I mean in the video tutorial below.

To enhance the wings, I painted the entire dragonfly with White Enchanted Shimmer and while still wet, I applied chunky glitter to the wings.

To finish off the dragonfly, I used UV resin to seal the piece. If you don’t have UV resin you could use a variety of different sealers. Spray varnish coating or Diamond Glaze would work as alternatives.

Video Tutorial:

Suggested Materials:

Links are Affiliates
AZ – Amazon, O – Other

Denise Boddey Shop at: O	UV Resin Shop at: AZ	UV Light Shop at: AZ	Chalk paint Shop at: AZ
Salmon paint Shop at: AZ

Making Silver and Gold Earrings

Make a pair of silver and gold earrings using materials from The Maker’s Movement. #sponsored @jointhemakersmovement

with The Makers Movement

I really enjoy making earrings. Some of the easiest earrings to make use a die to cut the shape. The silver and gold earrings above are made using a die and other materials from The Maker’s Movement. I like the combination of silver and gold especially when you can’t decide which color of metal works with your outfit the best. Or if you are going to wear different metals for other jewelry pieces, these earrings can pull it all together.

A special thanks to The Maker’s Movement for providing materials to use in this post.

Materials:

Faux leather – silver and gold
Earring wires in silver
jump rings in silver
two jewelry pliers
Mini Maker die cutting machine
Mandorla dies

Video Tutorial:

Making Mod Earrings

Diy your own mod earrings with Grafix shrink film.

If you haven’t figured it out by now, I enjoy making jewelry. Grafix Arts sent me a variety of different plastic products to work with. These mod earrings are using silver shrink film.

I remember working with shrink plastic as a child and my excitement is still the same today. Watching the plastic shrink always thrills me and I am happy with the smaller results!

Materials:

StazOn black in pad
stamp
stamp block
hole punch
Silver Shrink Film
toaster oven
jewelry making findings
scissors
corner rounder
UV resin
UV lamp

Directions:

I stamped the image onto the silver film with StazOn ink twice.

I had a few areas that didn’t stamp solidly. Using a cotton swab and the ink pad, I filled in those areas – it worked great!

I used a corner rounder punch on the cut out pieces so there wouldn’t be any sharp edges when wearing the earrings.

I then centered a hole punch at the top of each image.

The plastic is now ready to bake. I have a dedicated toaster oven for crafting. I placed them on parchment paper, cover them with another piece of parchment paper, and followed the package directions for baking.

The two shrunk pieces are covered with UV resin to add thickness and longevity to the earrings. Then I used a variety of materials to finish off the earrings: silver wire, jump rings, black beads, ear wires, and jewelry-making tools.

I found the resin actually started the ink to bleed so if I were to do it again, I would spray fix the stamped image before using the UV resin.

Suggested Materials:

Links are Affiliates
AZ – Amazon, SSS – Simon Says Stamps, SB – Scrapbook

Westcott 14849 8″ Straight Titanium Bonded Non-Stick Scissors Shop at: AZ	UV Resin Shop at: AZ	UV Light Shop at: AZ	Jewelry Tool Kit Shop at: AZ
StazOn Shop at: AZ \| SSS \| SB	Grafix Shrink Film Shop at: AZ

Shrink Plastic Necklace

Make a necklace from Shrink Film. #sponsored @graphixarts

I was sent a sample of Shrink Film from Grafix. I was so excited to see the film in silver and gold. I wasn’t aware of the color options. The gold was such a nice color for jewelry making. The technique I used was so simple and easy to do and the result is one of my favorite pieces.

Materials:

Shrink Film – gold
StazOn black ink
stamp
hole punch
corner rounder
scissors or paper trimmer
toaster oven or heat source
UV resin (optional)
UV light (optional)
jewelry making materials
beads
cord

Video Instruction:

To finish it off I used a black spacer bead and a gold crystal. Gold wire was used to join the pieces together and it hangs from an adjustable waxed cord in black.

Learn how to tie an adjustable knot [youtube video]

Suggested Materials:

Links are Affiliates
AZ – Amazon, SSS – Simon Says Stamps, SB – Scrapbook, O – Other

Portable Trimmer Shop at: AZ \| O \| C	UV Resin Shop at: AZ	UV Light Shop at: AZ	StazOn Shop at: AZ \| SSS \| SB
Graphix Shrink Film Shop at: AZ

How To Make Faux Leather Earrings

How to make faux leather earrings with a Cricut. Includes a free SVG file. How to Make Jewelry Using a Cricut Machine.

Making earrings with your personal die cutting machine is a current hot topic in crafting. I’ve done it before [see post here], but these leaf-like earrings are my newest design. This version of earrings was made using The Best Glue Ever by ScraPerfect. It really made making them and attaching the layers together easy. The tacky glue dries quickly but leaves enough time to maneuver the position of the layers.

________________________________________________________________________

I want to personally thank Cricut and ScraPerfect for providing materials for this post. I am a design team member with Cricut and ScraPerfect.

The following links may contain affiliate links. They help support this site and cost you nothing to use them.
_________________________________________________________________________

Materials:

2 colors of faux leather (Cricut Brand)
Personal cutting machine (Cricut Maker)
The Best Glue Ever
a weight (I used a tile)
2 crystal beads – blue
2 silver jump rings – small
2 earring wires – loop on 1 end
2 fish hook ear wires
jewelry making tools (wire cutter, round nose plier, flat plier)
free SVG file
To save as an SVG click the image and do a save as SVG

earringsfaux Download

Using a Cricut Maker, I cut the faux letter

cut pieces of faux leather

using The Best Glue Ever

Once glued and in place, I used a tile to weight
the layered faux leather down.
Let dry overnight.

I used a T-pin to poke a hole in the faux leather and
attached a jump ring and earring wire.
Threading the crystals and finishing off the wirework
to make the finished earrings.