how to – Page 7 – Try It – Like It

Designing a Leaf Letterhead

The Leaf Letterhead SVG file can be used in a variety of different ways.

with CutCardStock

This leaf letterhead svg file is very versatile. I’ve created a finished decor piece with it to show you how it could be used. The design was created to be used in a variety of different ways like a letter, menu, invitation, announcement, and any other way you can imagine. You don’t have to put another piece behind the design, or on top of it as shown. It is just one option for this file.

Many of the items I use in posts are provided by the manufacturers to promote their products.
A special thanks to those brands who sponsor this site.

The Royal Sundance Card Stock in Brilliant White is the star of this post and the card stock that was cut. It’s joined with Stardream Metallic Gold and Glama Card Stock in Kraft. The poem was printed using my Cricut Maker and the Kraft card stock but it could also be printed on a printer.

Use a personal cutting machine that works with an SVG file. I am using a Cricut Maker for cutting and writing. Because the design is 8.5″ x 11″, and the card stock is the same size, you have to pay attention to the alignment on your mat. The Kraft card stock was written on and cut on the Cricut Maker too. I used a 0.4 black Cricut pen for the writing.

Video Tutorial:

The SVG file for the Leaf Letterhead’s link can be found at: [Leaf Letterhead] – Make sure to read the note about how to center the file.

The link for the poem in Cricut Design Space: [Frost poem]

Making a No-Sew Clutch

Make a no-sew formal clutch with products from Gwen Studios.

with Gwen Studios

This clutch handbag is perfect for a wedding or any formal occasion. It can be made with no sewing at all. The beautiful satin and ribbon are from Gwen Studios. As a new member of their design team, I will be posting projects every month using their wonderful products that are available at Walmart.

Many of the items I use in posts are provided by the manufacturers to promote their products.
A special thanks to those brands who sponsor this site. Some links are affiliates, thank you for using them.

I received a box full of different materials from Gwen Studios. The ribbon and satin shown above are what I chose to work with to make this handbag tutorial.

Directions:

Step 1
The structure of the handbag is made with a plastic placemat, white craft foam, and Gwen Studios satin fabric. The placemat provides support and is covered on both sides. Satin fabric on the outside of the handbag and the craft foam on the inside.

Step 2
The decorative band on the front of the handbag was made by stacking three different ribbons from Gwen Studios with Fabri-Tac. This was done while the handbag structure was drying.

Step 3
The sides of the clutch are made by using white craft foam. Two pieces were cut to the height of the clutch and then glued with Fabri-Tac to the front and back of the inside. Once the glue is dry, just push the foam into the middle of the clutch.

Step 4
Velcro is used for the closure of the handbag. The velcro circles came with adhesive but I added additional support with a bit of Fabri-Tac.

Video Tutorial:

Using the same technique, I made a lipstick case to go inside the clutch. The differences are craft foam for the structure, double stick tape for the adhesive, and a snap closure instead of velcro.

Check out the other ideas from the design team at Gwen Studios: [wedding projects]

Can You Stamp on Glass?

Have you ever tried to stamp and emboss on glass? See the magic!

with Fairy Stamper

The answer is, yes you can! I was excited when I saw this technique and knew I had to give it a try. Stamping and embossing on glass! I love the result. This beautifully framed piece was created as a part of the Fairy Stampers Video Design Team.

Many of the items I use in posts are provided by the manufacturers to promote their products.
A special thanks to those brands who sponsor this site.

Materials:

Condo Dwellers FHS-060
Fantasy Flowers FHS-032
Works Board
VersaMark stamp pad
frame with glass
embossing powder
heat gun
decorative paper

After stamping and applying the embossing powder, you’ll want to clean off any excess powder and move to a heat-safe surface. Then the fun part, watch the embossing powder transform under the heat.

Clean off both sides of the glass with water and then frame the glass to finish the piece. I can’t wait to try this again and color the image, similar to stained glass!

Video Tutorial:

Suggested Materials:

Links are Affiliates
AZ – Amazon, SSS – Simon Says Stamps, SB – Scrapbook

We R Memory Keepers – All-In-One Tool – The Works
Shop at:
AZ | SSS | SB

Versamark
Shop at:
AZ | SSS | SB

Zing! Embossing Powder
Shop at:
AZ

Making a Fall Shaker Tag

With fall in the air, make this fall themed shaker tag from the free SVG file.

with CutCardStock

I think fall is my favorite season. I love the crisp air and all the fall colors. This fall shakers tag file I am sharing with you today is so versatile. You can make the tag as a shaker, or just use the front panel for a tag. Then, you have a variety of different ways to use your tag. On a card, a gift, in a journal, with mixed media…

Many of the items I use in posts are provided by the manufacturers to promote their products.
A special thanks to those brands who sponsor this site.

With its shimmering fibers and rich brown hue, the Stardream Metallic card stock is one of my favorite brands of card stock from CutCardStock. The fall tag is made with the bronze Stardream card stock.

Use a personal cutting machine that works with an SVG file. The tag’s size can be adjusted. I made mine 3.5″ wide, and cut mine on a Cricut Maker at 100# card stock. I’d recommend cutting the file twice. After the first cut, don’t remove the mat but push the go button to cut again. If your mat has lost some adhesion, I recommend using washi tape on all four sides of the card stock to hold it in place.

A few materials are needed to create this project, and changing what you use can change the look as well as make the project fun! Coordinate the shaker elements with the ribbon to personalize your tag.