Shrink Film Earrings

Make earrings with Shrink Plastic from @grafixinc and jewelry supplies from @beebeecraft. #affiliate

finished earrings

I enjoy making earrings. Often when I get an art supply I think about how I can make jewelry with it and that is the case when I got a set of beautiful stamps from BeebeeCraft, GLOBLELAND Flowers, and Leaves Background Silicone Clear Stamps.

The links provided are for your use and may contain affiliate links.
They cost nothing for you to use.
Thank you in advance for supporting this site with its use.

stamped and inking

After stamping the shrink film with Stazon ink and trimming them down to the stamped image, I turned them over and applied alcohol ink with a cosmetic sponge.

after shrinking

Before shrinking, I used a paper punch to punch holes for hanging, and then I used a heat gun to shrink the film. To finish off the shrink film pieces, I coated each side with a single layer of UV Resin.

materials

I used Benecreat wire and Mixed Green Round Glass Seed Beads from BeebeeCraft to finish the earrings.

Video Tutorial:

detail

This close-up image shows the stamped image and the texture created by the alcohol inks.

Suggested Materials:

Links are Affiliates
AZ – Amazon, SSS – Simon Says Stamps, SB – Scrapbook, O – Other
Benecreat Wire
Benecreat Wire
Shop at:
O
Flower and Leaves Stamps
Flower and Leaves Stamps
Shop at:
O
Grafix Shrink Film
Grafix Shrink Film
Shop at:
O
Green Seed Beads
Green Seed Beads
Shop at:
O
Non-Stick Scissors
Non-Stick Scissors
Shop at:
AZ
StazOn
StazOn
Shop at:
AZ | SSS | SB
T-Rex Alcohol Inks
T-Rex Alcohol Inks
Shop at:
AZ
Teflon Craft Mat
Teflon Craft Mat
Shop at:
AZ
WRMK Stamping Platform
WRMK Stamping Platform
Shop at:
AZ
You-V Resin
You-V Resin
Shop at:
O

DIY Butterfly Earrings

Learn how to make butterfly earrings with shrink film and UV Resin.

final earrings

I was so happy with the result of these DIY Butterfly Earrings. When my daughters saw them they requested pairs be made for them too, so I knew I had stumbled upon something good.

stamped image

I began with a stamped image on Grafix shrink art film in white. StazOn ink is great for this process because it is made for every surface and stamps a rich dark black.

cut out film

After stamping the image and allowing the ink to dry, I cut out the butterflies with a small detail scissor.

colored in

Coloring the butterfly with water-based markers was a bit of a challenge on plastic but I have a few tips in the video tutorial to make it work.

size difference

See the size difference between the stamped image and after the film has been shrunk. I used a heat gun to shrink the film, a dedicated toaster oven also works well.

I colored the edge and the back of the butterfly with a permanent black marker. Then I coated the back with matte UV resin and the front with jewelry resin both from You-V. The cool thing about You-V resin is that it is a quick cure resin, less than a minute under a UV flashlight.

You can see the gloss of the resin on the butterfly now. Drilling a hole into the top of the wing prepares the piece for the jewelry findings.

Video Tutorial:

Suggested Materials:

Links are Affiliates
AZ – Amazon, SSS – Simon Says Stamps, SB – Scrapbook, O – Other
Grafix Shrink Film
Grafix Shrink Film
Shop at:
AZ
Jewelry Tool Kit
Jewelry Tool Kit
Shop at:
AZ
StazOn
StazOn
Shop at:
AZ | SSS | SB
WRMK - All-In-One Tool - The Works
WRMK – All-In-One Tool – The Works
Shop at:
AZ | SSS | SB
You-V Resin
You-V Resin
Shop at:
O

DIY Christmas Tree Earrings

Die cut a pair of Christmas tree earrings using shrink plastic three different ways.

with Scrapbook.com

3 pairs of earrings

Fun for the holidays, fun for gift-giving, make a pair of Christmas tree earrings with a die from Scrapbook.com, and shrink film. I’ve shown three different designs all made from the same die. The green earrings are using alcohol ink, the rose gold earrings used a stamp pad, and the silver and black pair were stamped with a rubber stamp.

Many of the items I use in posts are provided by the manufacturers to promote their products.
A special thanks to those brands who sponsor this site. Some links are affiliates, thank you for using them.

die and shrink film

To make the earrings I used the smallest die from the Nested Tree Dies and shrink film from Grafix. I used white and silver shrink film.

Materials:

  • Nested Tree Die
  • Shrink film – white, silver
  • CrossOver II
  • alcohol inks
  • Rose gold stamp pad
  • Stazon ink pad
  • rubber stamp
  • jewelry making tools and findings
  • Alcohol ink marker (green)
  • UV light
  • UV resin
  • hole punch
  • toaster oven

Video Tutorial:

As the film shrinks, the colors become more intense. While there was a pattern on the rose gold trees, it is all but gone once shrunk. However, they did take on a more metallic sheen almost like glitter. Do you have a favorite pair?

Make sure you stop at every crafty post along the way for Christmas magic and inspiration!

1. Jamie Pate
2. Juliana Michaels
3. Marie Nicole
4. Becki Adams
5. Patricia Roebuck
6. Terra O’Brien
7. Amy Mattingly
8. Janet Trieschman
9. Adrienne Boese
10. Amy Brown
11. Kinjal Trivedi 
12. Nadine Carlier
13. Erin Reed
14. Anita Trippi
15. Lynda Keyes
16. Lea Lawson

Suggested Materials:

Links are Affiliates
AZ – Amazon, SSS – Simon Says Stamps, SB – Scrapbook, O – Other
Crossover II
Crossover II
Shop at:
AZ
Grafix Shrink Film
Grafix Shrink Film
Shop at:
AZ
Jewelry Tool Kit
Jewelry Tool Kit
Shop at:
AZ
Nested Tree Die
Nested Tree Die
Shop at:
SB
Spectrum Noir Markers
Spectrum Noir Markers
Shop at:
AZ | SSS | SB
StazOn
StazOn
Shop at:
AZ | SSS | SB
UV Light
UV Light
Shop at:
AZ
UV Resin
UV Resin
Shop at:
AZ

Making Mod Earrings

Diy your own mod earrings with Grafix shrink film.

If you haven’t figured it out by now, I enjoy making jewelry. Grafix Arts sent me a variety of different plastic products to work with. These mod earrings are using silver shrink film.

I remember working with shrink plastic as a child and my excitement is still the same today. Watching the plastic shrink always thrills me and I am happy with the smaller results!

Materials:

  • StazOn black in pad
  • stamp
  • stamp block
  • hole punch
  • Silver Shrink Film
  • toaster oven
  • jewelry making findings
  • scissors
  • corner rounder
  • UV resin
  • UV lamp

Directions:

I stamped the image onto the silver film with StazOn ink twice.

I had a few areas that didn’t stamp solidly. Using a cotton swab and the ink pad, I filled in those areas – it worked great!

I used a corner rounder punch on the cut out pieces so there wouldn’t be any sharp edges when wearing the earrings.

I then centered a hole punch at the top of each image.

The plastic is now ready to bake. I have a dedicated toaster oven for crafting. I placed them on parchment paper, cover them with another piece of parchment paper, and followed the package directions for baking.

The two shrunk pieces are covered with UV resin to add thickness and longevity to the earrings. Then I used a variety of materials to finish off the earrings: silver wire, jump rings, black beads, ear wires, and jewelry-making tools.

I found the resin actually started the ink to bleed so if I were to do it again, I would spray fix the stamped image before using the UV resin.

Suggested Materials:

Links are Affiliates
AZ – Amazon, SSS – Simon Says Stamps, SB – Scrapbook
Westcott 14849 8
Westcott 14849 8″ Straight Titanium Bonded Non-Stick Scissors
Shop at:
AZ
UV Resin
UV Resin
Shop at:
AZ
UV Light
UV Light
Shop at:
AZ
Jewelry Tool Kit
Jewelry Tool Kit
Shop at:
AZ
StazOn
StazOn
Shop at:
AZ | SSS | SB
Grafix Shrink Film
Grafix Shrink Film
Shop at:
AZ