Making Silver and Gold Earrings

Make a pair of silver and gold earrings using materials from The Maker’s Movement. #sponsored @jointhemakersmovement

with The Makers Movement

I really enjoy making earrings. Some of the easiest earrings to make use a die to cut the shape. The silver and gold earrings above are made using a die and other materials from The Maker’s Movement. I like the combination of silver and gold especially when you can’t decide which color of metal works with your outfit the best. Or if you are going to wear different metals for other jewelry pieces, these earrings can pull it all together.

A special thanks to The Maker’s Movement for providing materials to use in this post.

die
earring parts
pliers

Materials:

  • Faux leather – silver and gold
  • Earring wires in silver
  • jump rings in silver
  • two jewelry pliers
  • Mini Maker die cutting machine
  • Mandorla dies

Video Tutorial:

finished

How To Make Faux Leather Earrings

How to make faux leather earrings with a Cricut. Includes a free SVG file. How to Make Jewelry Using a Cricut Machine.

Making earrings with your personal die cutting machine is a current hot topic in crafting. I’ve done it before [see post here], but these leaf-like earrings are my newest design. This version of earrings was made using The Best Glue Ever by ScraPerfect. It really made making them and attaching the layers together easy. The tacky glue dries quickly but leaves enough time to maneuver the position of the layers. 

________________________________________________________________________

I want to personally thank Cricut and ScraPerfect for providing materials for this post. I am a design team member with Cricut and ScraPerfect.

The following links may contain affiliate links. They help support this site and cost you nothing to use them.
_________________________________________________________________________

Materials:​​

  • 2 colors of faux leather (Cricut Brand)
  • Personal cutting machine (Cricut Maker)
  • The Best Glue Ever
  • a weight (I used a tile)
  • 2 crystal beads – blue
  • 2 silver jump rings – small
  • 2 earring wires – loop on 1 end
  • 2 fish hook ear wires
  • jewelry making tools (wire cutter, round nose plier, flat plier)
  • free SVG file
    To save as an SVG click the image and do a save as SVG


Using a Cricut Maker, I cut the faux letter


cut pieces of faux leather


using The Best Glue Ever


Once glued and in place, I used a tile to weight
the layered faux leather down.
Let dry overnight.


I used a T-pin to poke a hole in the faux leather and
attached a jump ring and earring wire.
Threading the crystals and finishing off the wirework
to make the finished earrings.

Making Embossed Earrings with Maker’s Movement

I absolutely love the detail in these earrings. I wasn’t sure if I could emboss faux leather but I gave it a try and it turned out fabulously! I stamped an image onto the faux leather, applied embossing powder, and then heat set it. I was really impressed! I actually ended up making two pairs of earrings. Check out the how-to video below.

Materials:

  • faux leather *
  • Versamark ink
  • stamp
  • embossing powder
  • heat gun
  • soda can
  • dies *
  • Mini Maker *
  • super glue
  • jewelry making tools *
  • jewelry jump rings and ear wires *
  • silver paint pen

The items marked with an asterisk (*) were provided by Maker’s Movement.

Video Directions:


smaller pair of earrings

Suggested Materials:

Links are Affiliates AZ – Amazon, SSS – Simon Says Stamps, SB – Scrapbook

 Gold paint pen
Gold paint pen
Shop at:
AZ
Versamark
Versamark
Shop at:
AZ | SSS | SB
Homeright Heat Gun
Homeright Heat Gun
Shop at:
AZ
Zing! Embossing Powder
Zing! Embossing Powder
Shop at:
AZ