Using charms from the craft store make for quick and affordable earrings.
Making earrings from charms is so easy. These beautiful butterfly wings came in a set of four pairs from Hobby Lobby. I was able to make four pairs of earrings for less than $10, making these a very affordable gift. Charms and buttons make for quick and easy earrings.
Using two jewelry pliers, charms, and matching ear wires I was able to make four pairs of earrings in no time at all.
Video Tutorial:
These were such a huge hit in my house, I have to go and buy a few more sets of charms so we don’t fight over the colors!
Learn how quick and easy it is to make resin earrings with You-V jewelry gel resin.
with You-V Resin
These resin earrings are rather quick and very easy to make. I used You-V resin because of its quick drying time and safety features. Using a mold and a few inclusions and I have a new pair of earrings that work with a variety of different outfits.
The links provided are for your use and may contain affiliate links. They cost nothing for you to use. Thank you in advance for supporting this site with its use.
I used blue jewelry gel resin from You-V, an earring mold, a UV flashlight, and some glitter inclusions.
The resin and inclusions are in the mold. Blue jewelry gel resin is transparent and very light in color. In this image, you can see the randomness and similarities of the inclusions.
All the curing steps were done with a UV flashlight. The gel can be cured with a UV nail lamp as well. Because the resin cures quickly, it was easy to hold a flashlight for the time needed. A UV nail light will also work.
Once the resin pieces were taken out of the mold and cleaned up, they were ready for the jewelry findings. I actually needed 2 more small jump rings that aren’t seen in this photo.
To see all the process steps and tips watch the complete video tutorial below.
Video Tutorial:
Not all UV resin works the same way. You-V is rather special in that it cures quickly (30 seconds to a minute) and is SGS certified with solvent-free composition. Under regular handling, it has a low risk of skin irritation making it safe to use without protection as well as safe for kids to use.
Combine resin and cardstock for quick and easy earrings.
Combine cardstock and resin to make a pair of fabulous earrings. I have created a free printable inchie sheet of marbled circular designs for crafting. The first project I made using them was this pair of earrings. You-V resin, a quick-drying resin, made this project quick and easy.
marbled inches
Download the free PDF file from the store: [marbled inches]
I punched out circles using a 1″ paper punch using the printable and solid cardstock. Gluing the blue and the marbled circles together helped add thickness and a bit of weight to the earrings. Resin covers both sides of the glued circles.
Drilling small holes into the resined papers was done to add the ear wires. See the entire video below for the complete tutorial and tips.
Video Tutorial:
The finished earrings in hand also show the shine from the resin and the finished size. This marble pattern suits a variety of different colors found in your wardrobe.
The links provided are for your use and may contain affiliate links. They cost nothing for you to use. Thank you in advance for supporting this site with its use.
See how 3 different pairs of earrings were made using K&S Precision Metal.
With K&S Metals
Whenever I am introduced to a new to me material, my first thought is, “can I make jewelry with it”? So of course when I was sent metal from K&S, I knew I was going to attempt to make earrings. And it worked out really well. After making my first pair, I couldn’t stop. I had to try different techniques with the metal.
The links provided are for your use and may contain affiliate links. They cost nothing for you to use. Thank you in advance for supporting this site with its use.
K&S sent me 5 rolls of precision metal to work with in pink, gold, blue, purple, and green. The first pair of earrings I made was from the pink roll. Each roll of the metal is aluminum-based and .004″ Thick (36 Ga) x 12″ Wide x 24″ Long.
I chose to try die-cutting the metal. Earrings are small enough to use a small cutting machine and the mini Maker was just the perfect size. I cut the pink metal with the large heart twice and then flipped over the metal to cut the small heart out twice in silver.
To make the earrings I added black cardboard to the metal die-cut hearts to add thickness and weight. After all the pieces of the hearts were glued together, I poked a hole through the layers with a t-pin. Please refer to the video tutorial for detailed instructions.
Video Tutorial:
The next pair of earrings I made were silver and gold. For this pair, I began the same way with die-cutting. I used a decorative circle shape in two different sizes and then folded the circles in half, and placed them on top of each other. No glue was needed.
The final pair of earrings I made incorporated die-cut faux leather circles upon which I added die-cut metal stars. Before adding the stars, I ran the foil through my machine in an embossing folder and then filled the tops of the embossed dots with a nail file to remove the blue color so the silver could show through. The stars were then glued to the faux leather.
Learn how to make butterfly earrings with shrink film and UV Resin.
I was so happy with the result of these DIY Butterfly Earrings. When my daughters saw them they requested pairs be made for them too, so I knew I had stumbled upon something good.
I began with a stamped image on Grafix shrink art film in white. StazOn ink is great for this process because it is made for every surface and stamps a rich dark black.
After stamping the image and allowing the ink to dry, I cut out the butterflies with a small detail scissor.
Coloring the butterfly with water-based markers was a bit of a challenge on plastic but I have a few tips in the video tutorial to make it work.
See the size difference between the stamped image and after the film has been shrunk. I used a heat gun to shrink the film, a dedicated toaster oven also works well.
I colored the edge and the back of the butterfly with a permanent black marker. Then I coated the back with matte UV resin and the front with jewelry resin both from You-V. The cool thing about You-V resin is that it is a quick cure resin, less than a minute under a UV flashlight.
You can see the gloss of the resin on the butterfly now. Drilling a hole into the top of the wing prepares the piece for the jewelry findings.
Video Tutorial:
Suggested Materials:
Links are Affiliates AZ – Amazon, SSS – Simon Says Stamps, SB – Scrapbook, O – Other
Two tutorials for making sheer ribbon rose earrings with Gwen Studios.
with Gwen Studios
Today I am making two different kinds of ribbon rose earrings for the Gwen Studios design team. I am using sheer ribbon from Gwen Studios in red and pink. These would make great gifts and just in time for Valentine’s Day. The pink earrings have a stud back and the red rosebud earrings are dangles.
I am working with 7/8″ sheer Gwen Studios ribbon that can easily be found at Walmart. (links at the bottom of the post)
If you would like to see all the other creations made for Romancing the Ribbon by the Gwen Studios design team members, you can find them at Designer Crafts Connection.
Pink Ribbon Rose Earrings
The ribbon rose earrings in pink are made by free forming the ribbon into a rose, this is better described in the video tutorial below. The addition of green satin ribbon is used for leaves. Everything is held together with Farbri-tac glue and a binder clip while drying. I used a needle to move the ribbon around – there is no sewing needed.
After the roses have dried completely and the excess ribbon is cut away, I used gel Super Glue to adhere the stud earring backs to the roses.
Ribbon Rose Earrings Video Tutorial:
Red Ribbon Rosebud Earrings
The red rosebud earrings use a different technique to create the buds. The ribbon is folded and held together with double-sided tape. This process is explained in the video tutorial below.
To make the bud earrings, I needed a pair of scissors, lighter, flat nose pliers with wire cutter, green craft wire, and double-sided tape. I also used folded paper to wrap the ribbon around which is explained in the video below.
Rosebud Earrings Video Tutorial:
I am showing you each pair of earrings in my hand so you can get a sense of the size of the finished earrings.
Die cut a pair of Christmas tree earrings using shrink plastic three different ways.
with Scrapbook.com
Fun for the holidays, fun for gift-giving, make a pair of Christmas tree earrings with a die from Scrapbook.com, and shrink film. I’ve shown three different designs all made from the same die. The green earrings are using alcohol ink, the rose gold earrings used a stamp pad, and the silver and black pair were stamped with a rubber stamp.
Many of the items I use in posts are provided by the manufacturers to promote their products. A special thanks to those brands who sponsor this site. Some links are affiliates, thank you for using them.
To make the earrings I used the smallest die from the Nested Tree Dies and shrink film from Grafix. I used white and silver shrink film.
Materials:
Nested Tree Die
Shrink film – white, silver
CrossOver II
alcohol inks
Rose gold stamp pad
Stazon ink pad
rubber stamp
jewelry making tools and findings
Alcohol ink marker (green)
UV light
UV resin
hole punch
toaster oven
Video Tutorial:
As the film shrinks, the colors become more intense. While there was a pattern on the rose gold trees, it is all but gone once shrunk. However, they did take on a more metallic sheen almost like glitter. Do you have a favorite pair?
Make sure you stop at every crafty post along the way for Christmas magic and inspiration!
Learn how to DIY your own sublimation earrings. #sponsored @artesprix @oliso
With Artesprix
Recently I was a guest designer at Artesprix. I really enjoyed the process of creating with Sublimation markers. When I saw sublimation earring blanks on Amazon I knew I needed to work with them. This is the first, but not the last, pair of earrings I will be making. I really like the idea of being able to make earrings in colors and designs to match my outfits. These sublimation earring blanks let me do just that. Follow along and learn how to make your own sublimation earrings.
Materials:
Many of the items I use in my posts are provided by the manufacturers in order to promote their products. A special thanks to those brands who sponsor this site.
Artesprix markers
earring blanks
stamp
Artesprix stamp pad
Artesprix heat tape
Artesprix protective paper
Artesprix project mat
Oliso craft iron
pencil
scissors
rhinestones
super glue
permanent black marker
I chose to work with four of the markers included in the pastel marker set from Artesprix.
After the design is colored in, it is time to prepare the earrings for heat to transfer the design. Don’t forget to peel the protective layer from each side of the earrings before heating. A pin helped me easily remove the film.
It is really important to prepare the layers before applying heat. I have a project mat on my work surface, then a piece of protective paper. The blank with the design taped in place comes next with the colored paper on top. Then finally another piece of protective paper. Now you are ready to apply the heat. If using an iron, the heat tape is really important so the design doesn’t move around.
I added rhinestones to the center of the earrings and colored the edges with a permanent black marker to finish off the design.
Make an adorable dragonfly pin with Denise Boddey Designs. @deniseboddeydesigns #sponsored @DecoArtAcrylicPaints
Follow along as I make this adorable Dragonfly Pin using a chipboard design piece from Denise Boddey Designs. This post is created as a part of the design team and some materials have been provided to use in this post. You can make your pin in different colors if you wish. Make one match a special outfit or for a special occasion. The Dragonfly Pin would also make a great gift or an embellishment for a card or mixed media project.
white paint
Since the chipboard is dark, I used white chalk paint to coat the dragonfly. I found it needed two coats to fully cover the piece. Now the colors will show up better.
paint colors
I used a variety of paint colors and applied them in a dabbing motion. You can see what I mean in the video tutorial below.
glittered
To enhance the wings, I painted the entire dragonfly with White Enchanted Shimmer and while still wet, I applied chunky glitter to the wings.
resin
To finish off the dragonfly, I used UV resin to seal the piece. If you don’t have UV resin you could use a variety of different sealers. Spray varnish coating or Diamond Glaze would work as alternatives.
Diy your own mod earrings with Grafix shrink film.
If you haven’t figured it out by now, I enjoy making jewelry. Grafix Arts sent me a variety of different plastic products to work with. These mod earrings are using silver shrink film.
I remember working with shrink plastic as a child and my excitement is still the same today. Watching the plastic shrink always thrills me and I am happy with the smaller results!
Materials:
StazOn black in pad
stamp
stamp block
hole punch
Silver Shrink Film
toaster oven
jewelry making findings
scissors
corner rounder
UV resin
UV lamp
Directions:
I stamped the image onto the silver film with StazOn ink twice.
I had a few areas that didn’t stamp solidly. Using a cotton swab and the ink pad, I filled in those areas – it worked great!
I used a corner rounder punch on the cut out pieces so there wouldn’t be any sharp edges when wearing the earrings.
I then centered a hole punch at the top of each image.
The plastic is now ready to bake. I have a dedicated toaster oven for crafting. I placed them on parchment paper, cover them with another piece of parchment paper, and followed the package directions for baking.
The two shrunk pieces are covered with UV resin to add thickness and longevity to the earrings. Then I used a variety of materials to finish off the earrings: silver wire, jump rings, black beads, ear wires, and jewelry-making tools.
I found the resin actually started the ink to bleed so if I were to do it again, I would spray fix the stamped image before using the UV resin.
Suggested Materials:
Links are Affiliates AZ – Amazon, SSS – Simon Says Stamps, SB – Scrapbook