artesprix - Try It - Like It

Shaving Cream Marbling Coasters

Learn how to marble sublimation inks for colorful coasters. #artesprix

with Artesprix

I am thrilled to be a guest designer at Artesprix using the textured coasters. I actually experimented with a technique I’ve been wanting to try, shaving cream marbling. I wondered if it would work with the sublimation inks. These coasters are the results of my experiment.

The links provided are for your use and may contain affiliate links.
They cost nothing for you to use.
Thank you in advance for supporting this site with its use.

Materials:

Sublimation Inks
shaving cream
Textured Coaster Blanks
Heat Resistant Tape
Protective Paper Roll
copy paper
aluminum pan
Cricut big scrapper
Protective Project Mat
Cricut EasyPress
dowel rod

After filling the pan with shaving cream and using the scrapper to smooth the surface, I dropped eight drops of each color onto the shaving cream.

Swirl the ink into the shaving cream until you like the design. Then place the paper on top of the design and press down until you see the entire surface of the paper appears covered.

Lift the paper off of the shaving cream and then place it on a flat surface.

Scrap the shaving cream off the paper. Set the paper aside to dry.

The ink and shaving cream can be used over and over again. You can add ink as needed or use what remains. Here are the two designs I tested out on the coasters.

Once the area of the design was chosen, I used heat-resistant tape to hold the paper in place. Then sandwiched that between protective paper.

I used a Cricut EasyPress at the settings recommended on the Artesprix website.

After heat setting, do a peek test before totally removing the sublimation design from the blank. Be careful handling the blank since it will be hot.

The results are quite colorful. I am happy with the results and I look forward to trying it again with the Artesprix paint.

Sublimating Ribbon

Learn how easy it is to create your own ribbon designs using sublimation ink pads and markers. @gwenstudios @artesprix #affiliate

Now you can create your own special designer Gwen Studios ribbon. I love how this sublimated ribbon made this gift box so special. Putting your own design on a ribbon is very easy to do using sublimation ink pads and markers. The ones I am using are from Artesprix.

The links provided are for your use and may contain affiliate links.
They cost nothing for you to use.
Thank you in advance for supporting this site with its use.

To create the image I am using a layering technique. I stamped the image and with the use of a light table, I can see the image and know where to add the color. Then I stamped the image on top of the colored work. The reason for doing it this way was to illuminate the possibility of the inks bleeding together. You can see how this was done in the video below.

I actually did the entire process twice. I started with pastel colors as seen in the first image. They did transfer but weren’t visible enough for my taste so I did it again with brighter colors as seen above. Here I am making the sublimation sandwich to transfer the image.

This image show what is referred to as a sublimation sandwich. Working on a heat-resistant surface, I have a layer of protective paper, then the ribbon faces up, the colored and stamped image face down is held in place with heat-resistant tape, and the entire thing will be covered with another piece of protective paper before heating.

Because my project is small I chose to use a craft iron instead of a heat press. With the iron set on high and no steam, I used a bit of pressure and left the iron on for a minute. Before removing the tape and image you will want to do a peek test to make sure everything is transferred.

This post is created for the Gwen Studios design team. Other projects can be found on the Designer Crafts Connection website. Gwen Studios ribbons can be found at Walmart and Michaels.

Video Tutorial:

Suggested Materials:

Links are Affiliates
AZ – Amazon, O – Other

Artesprix Heat Tape Shop at: AZ \| O	Artesprix Protective Paper Shop at: AZ \| O	Artexprix Project Mat Shop at: AZ \| O	Gwen Studios at Walmart Shop at: O	Oliso Mini Iron Shop at: AZ
Pastel Sublimation Markers Shop at: AZ \| O	Sewing Clips Shop at: AZ \| O	Sublimation Ink Pad Shop at: AZ \| O

Wrinkled Sublimation Necklace

Learn how to create a wrinkled technique for sublimation on jewelry.

with Artesprix

This wrinkle technique creates great results. I first tried it with regular stamp pads and was inspired by not wanting to throw away my used protective paper from sublimation. You can read about that here. [wrinkle technique] Immediately after doing so, I thought why not use the new sublimation ink pads from Artesprix for this technique? So here it is applied to a

Video Tutorial:

To finish off the pendant after sublimating the front, I used permanent black ink on the sides and back of the piece.

Suggested Materials:

Links are Affiliates
AZ – Amazon, C – Cricut, O – Other

Cricut EasyPress
Shop at:
AZ | O | C

Heat Resistent Tape
Shop at:
AZ | O

Jewelry Tool Kit
Shop at:
AZ

Protective Paper
Shop at:
AZ | O

Sublimation Ink Pad
Shop at:
AZ | O

Inked Wrinkle Technique

Don’t throw away your waste paper before trying this inked wrinkle technique.

The other day I was working on a sublimation project and I was discarding my protective paper. I hated the idea of throwing away paper and came up with this idea for its use. Using the scrap paper, I Inked it to make an interesting texture. I happened to use Protective Paper from Artesprix. It has a vellum or parchment paper look to it.

The links provided are for your use and may contain affiliate links.
They cost nothing for you to use.
Thank you in advance for supporting this site with its use.

The idea here is to use waste paper. The protective paper I had couldn’t be used again for sublimation because it had some ghosting of the sublimation ink on it which might transfer if used again. I started with a black ink pad and then continued with different colors of ink.

This is the inked wrinkles after I added a few different colors of ink. After finding this successful, I did it again with sublimation ink pads and I will have a tutorial on that outcome posted soon.

Video Tutorial:

I ended up making a card with the wrinkled paper. I think it could be used in a variety of different ways. No more wasted paper for me. I will be keeping a stash of these wrinkled ink papers for crafting. Did you find this useful? Let me know in the comments.

Artesprix Giveaway

Enter to win products from Artesprix and try your hand at sublimation.

A Crafty Giveaway

Special thanks to Artesprix for providing the products for this giveaway. One winner will get a 10 pack of Sublimation markers and a Sublimation ink stamp pad in black. Artesprix has a ton of new products arriving soon. These products have slight packaging changes coming but that doesn’t stop these from being great useful products.

The new products arriving in May consist of sublimation colored stamp pads in nine colors, stamp pad refills in those same nine colors, and sublimation paint in red, yellow, blue, black, and white. The white is for mixing and lightening the colors, it does not transfer.

I’ve had early access to these new products because I worked with Artesprix at a recent trade show. There was so much excitement and buzz around the new materials at the Namta Creativation trade show. It was fun working in their booth and talking about the new products as well as testing and demonstrating them. I can’t wait for you to try them. But until then, here is the giveaway.

Enter to Win

a Rafflecopter giveaway

Can It Sublimate?

Can you sublimate on plastic film and leather? Come see the results with Artesprix paints, stamp pads, and markers.

Yes, it can!

While working at the Artesprix booth at the Namta/Creativation trade show we were approached by a few brands wondering if their product could be sublimated. So I said, why not try? They brought over samples and we gave it a go.

I was familiar with both brands having worked with them in the past, Silver Creek Leather and Grafix.

The links provided are for your use and may contain affiliate links.
They cost nothing for you to use.
Thank you in advance for supporting this site with its use.

So the question was, “Can you sublimate leather, or what treatment does it need to make it work?”

A little google search and we were good to try it with the tanned leather.

See the video for important details:

The next one was Grafix with a polyester-coated clear sheet. What was this material? Duralar. They have it in both clear and matte. We did wonder if the plastic could take the 400-degree heat, but nothing ventured nothing gained.

See the video for important details:

We were also asked quite often if cotton can be sublimated. The answer is typically no but also yes. It works but it is a much less color-intensive outcome and not necessarily recommended.

There was interest in working with the new paints on a Gel Press. It has already been tested so yes it works. But it was fun to see the interest from those that work with collage and journaling. This brought up the question about layering. Again yes, you can apply layers of heat-set sublimation on top of each other. See it in action in the Grafix video above.

The other question most asked was why transfer it? Can’t you just apply the color to the blank? Again, yes you can! But here’s the thing. I was drawn to sublimation because of the ability to work on any paper surface and then transfer the image. Why? Because if you make a mistake or want to start over you haven’t ruined your blank.

So if you want to work with type and not have to deal with reversing it, you can stamp it directly onto your project with sublimation ink and then heat set it.

The new Artesprix paints and colored stamp pads will be available by May 1, 2022, at Artesprix.

Artesprix New Stamp Pads

Artesprix has new colored ink pads for sublimation.

Artesprix has a lot of new products coming soon. The tag pictured above was made with their new colored stamp pads. They sent me a few stamp pads to try out in advance of their release. There are a total of nine stamp pads available in Red, Orange, Yellow, Green, Blue, Purple, Pink, Brown, and Black.

The links provided are for your use and may contain affiliate links.
They cost nothing for you to use.
Thank you in advance for supporting this site with its use.

The Artesprix stamp pads I received are in blue, purple, and green. What a great color combination! These stamp pads are rich and juicy. They are more of a foam texture instead of a felt which means they are easy to ink up your stamps with a light tap of the stamp onto the pad.

For this project, I stamped a pattern of dragonflies and painted them. See the video tutorial below for the how-to of this stamp and paint technique. Instead of outlining the blank first, I stamped a pattern large enough to cover the blank and then chose the placement of the blank.

Follow the instructions for preparing your blank to heat. Make sure your blank is taped in place to the transfer design. Then use protective paper on the top and bottom, creating a sandwich. Once the heat source is placed, do not move it around. You might find a bit of pressure to be helpful.

Always lift a small corner to check the transfer before removing the taped design. This can really save your project. I had to heat mine twice since the EasyPress was losing some heat when I moved it onto the sandwich.

Video Tutorial:

I finished my tag off by going around the outside edge in purple Unicorn Spit and then placed a label on the back with my contact information. The label was made using a Cricut Joy. I plan on using it on my luggage.

The stamp pads should be available on the Artesprix website by May 5th.

Sublimation Earrings

Learn how to DIY your own sublimation earrings. #sponsored @artesprix @oliso

With Artesprix

Recently I was a guest designer at Artesprix. I really enjoyed the process of creating with Sublimation markers. When I saw sublimation earring blanks on Amazon I knew I needed to work with them. This is the first, but not the last, pair of earrings I will be making. I really like the idea of being able to make earrings in colors and designs to match my outfits. These sublimation earring blanks let me do just that. Follow along and learn how to make your own sublimation earrings.

Materials:

Many of the items I use in my posts are provided by the manufacturers in order to promote their products.
A special thanks to those brands who sponsor this site.

Artesprix markers
earring blanks
stamp
Artesprix stamp pad
Artesprix heat tape
Artesprix protective paper
Artesprix project mat
Oliso craft iron
pencil
scissors
rhinestones
super glue
permanent black marker

I chose to work with four of the markers included in the pastel marker set from Artesprix.

After the design is colored in, it is time to prepare the earrings for heat to transfer the design. Don’t forget to peel the protective layer from each side of the earrings before heating. A pin helped me easily remove the film.

It is really important to prepare the layers before applying heat. I have a project mat on my work surface, then a piece of protective paper. The blank with the design taped in place comes next with the colored paper on top. Then finally another piece of protective paper. Now you are ready to apply the heat. If using an iron, the heat tape is really important so the design doesn’t move around.

I added rhinestones to the center of the earrings and colored the edges with a permanent black marker to finish off the design.

Video Tutorial:

Suggested Materials:

Links are Affiliates
AZ – Amazon, O – Other

Westcott 14849 8″ Straight Titanium Bonded Non-Stick Scissors Shop at: AZ	Super Glue Shop at: AZ	Rhinestones Shop at: AZ	Sublimation Earrings Shop at: AZ
Sublimation Ink Pad Shop at: AZ \| O	Pastel Sublimation Markers Shop at: AZ \| O	Protective Paper Shop at: AZ \| O	Heat Resistent Tape Shop at: AZ \| O
Art-c stamp Shop at: AZ	Oliso Mini Iron Shop at: AZ

Working with Artesprix Sublimation Products

Unboxing Artesprix product for a future post and a quick bookmark tutorial. #sponsored @artesprix #affiliate

I was invited to be a guest design team member with Artesprix. Today I am sharing an unboxing of the materials they sent and a quick tutorial. I will be sharing a post on the Artesprix blog later this summer creating a tag project.

Artesprix makes sublimation markers and blanks. Blanks are specially treated products that accept the sublimation ink. Think of how fun it would be to personalize different products for gift giving. What a fun way to memorialize a child’s artwork or a special occasion.

A while back, I attended a trade show where I was given a sample project from Artesprix, a sublimation marker, and a bookmark. I will be using that today in this post. I think this bookmark project would be a really fun activity for a book club to create.

One of the best things I found about working with Artesprix is that you create on regular copy paper. Once you like what you have created, you transfer that image to the blank/product. This allows you to perfect your drawing before committing it to a finished product.

This bookmark project was quick and easy. Although not perfect due to some movement (user error) that caused shadowing of the image, I am really happy with the end result and I actually like the shadowing effect. I wish it was over the entire bookmark instead of just the bottom half. And of course, pink is a really nice color!

Artesprix Heat Tape Shop at: AZ \| O	Artesprix Protective Paper Shop at: AZ \| O	Artexprix Project Mat Shop at: AZ \| O	Gwen Studios at Walmart Shop at: O	Oliso Mini Iron Shop at: AZ
Pastel Sublimation Markers Shop at: AZ \| O	Sewing Clips Shop at: AZ \| O	Sublimation Ink Pad Shop at: AZ \| O