April 2022 – Try It – Like It

How to Foil Chipboard

Learn how to apply foil to chipboard for a colorful result.

What a fun way to upscale chipboard using foil. This chipboard was purchased at the Dollar Tree but any chipboard pieces will work. There are different ways to get texture with the foil based on how you apply the transfer gel. After foiling, I used the chipboard on the front of a card and added additional color and texture with cardstock pieces.

The links provided are for your use and may contain affiliate links.
They cost nothing for you to use.
Thank you in advance for supporting this site with its use.

Materials:

Transfer Gel Duo
Transfer Foil (Summer Rainbow)
chipboard sentiment
colored cardstock
adhesive

Applying Transfer Gel on chipboard can be done in a variety of ways. Using my finger to apply it gave a very nice texture to the surface when the foil was applied. You can see the entire transfer process and card making in the video tutorial below.

Video Tutorial:

The close-up image shows the texture detail from the foil on the chipboard. This version is the one with less foil applied as seen in the video tutorial. The brushstroke-like effect is very nice in person, while the overall color shimmers with movement.

Some items used in this tutorial were provided by the manufacturer in order to promote their products.

Creatively Crafty Link Party #325

Link up your creative posts with Creatively Crafty Link Party.

Life Beyond the Kitchen | Try it – Like it – Create it

This week’s Link Party

There are just a few simple rules:

Link to a specific post, not your homepage.
Link up something YOU made/wrote/created.
Giveaways, other link parties, Etsy shops, or business links are not accepted.
Don’t link and run. Try to visit at least one link and show them some love. You may make a new friend.

How to Make a Leather Flower

How to make a leather magnolia flower with leather from Silver Creek Leather Co.

with Silver Creek Leather Co.

At a recent trade show, I took a class to learn how to make a leather flower. The class was sponsored by Silver Creek Leather Co. and taught by Annie Libertini. The magnolia flower above was the class project. I had to leave the class early for another event so I brought everything home and finished the flower.

Silver Creek Leather Co. sells leather under the brand name Real Leather. You can find it in your local craft stores and online at Amazon.

The links provided are for your use and may contain affiliate links.
They cost nothing for you to use.
Thank you in advance for supporting this site with its use.

The image above shows the parts I brought home from the class. We marked the leather in class and started to form the shapes. You can use a variety of different items to shape leather. In class, we used a ping-pong ball for the smallest petals, although mine flattened out during travel home. The leather shapes were already cut and provided for us. Leather can easily be cut by hand with a sturdy scissor or with a die-cut machine.

Materials:

spray bottle with water
marking tool
cut leather pieces
paint
paintbrush
hot glue and glue gun
mica spray (optional)

A close-up of the petals shows the drawn lines on the leather before painting. It was suggested to use two light coats of paint front and back of each piece. We were given paint specifically for leatherwork however any acrylic paint will work.

I sprayed the white petals with DIY Mica Spray for a light covering of shine, it is really subtle and not necessary but I wanted to add it to mine. After drying, the pieces are ready to be glued together. I have seen other leather flowers that were sewn together with a few stitches, so it is your choice how to join the pieces together.

Video Tutorial:

close-up of flower — close-up of leather flower

I am so please with what I learned and the outcome of this project. I feel like I have just started to experiment with leather as a medium and I am looking forward to more leather creations.

These flowers made by Annie Libertini were shown in class as additional examples. I believe there will be leather flower kits available soon created by Annie Libertini for Silver Creek Leather so keep on the lookout for them.

Floral Circle Card

Make an elegant floral card with this free SVG file. Great for weddings and anniversaries or any special greeting.

with CutCardStock

What a beautiful card that could be used for a wedding, an anniversary, or just a special greeting. You can add your own sentiment or leave it as is. I love how the neutral colors coordinate together. Three different papers were used to make this card.

The links provided are for your use and may contain affiliate links.
They cost nothing for you to use.
Thank you in advance for supporting this site with its use.

The papers used were Stardream Metallic in Quartz for the card. Stardream is my favorite cardstock because it has a shimmer to the surface. Cut the floral element from MirriSparkle Glitter in Gold, and the vellum insert from Curious Translucent in Clear.

I cut the file on a Cricut Maker. As a reminder, set the red lines to score and load your scoring tool before setting the file to cut. Similar weight cardstocks can be cut at the same time. Set your machine to 100lb cardstock for the Stardream and the Gold Glitter and run the cut twice. Just push the go button again without removing your mat.

The cut file has three parts to glue together. Any adhesive will work, I am using Reptile Craft Adhesive. I’ve placed it into a smaller bottle (as seen in the photo above). You can purchase the pearl gems at the Dollar Tree.

If you would like a coordinating gift box, see the following link: Circular Box

Video Tutorial:

Please visit the store to download the free SVG file for the card. [Elegant Card SVG]

This view shows the detail of the decorative piece on the front of the card. I like the dimension gained from the addition of the pearl gems as well as the see-through element of the vellum.

The above view of the card shows off the see-through quality of the vellum.

How to Etch Glass

It is easy to etch glass with the right tools. Learn how in this tutorial.

with Etchall

Etching glass is a very simple process given the right tools. I enjoy working with Etchall Etching Creme. One reason is that Etchall is reusable so a small jar lasts a long time. Making these Salt and Pepper shakers was simple and fast but the result is fantastic. I wanted to make these for myself but they would make a great housewarming gift or hostess gift too.

The links provided are for your use and may contain affiliate links.
They cost nothing for you to use.
Thank you in advance for supporting this site with its use.

Materials:

Etchall Creme – receive 10% of orders with code: “Janet“
salt and pepper shakers
vinyl
Cricut Maker
baby wipes
tape
scissors
plastic pallet knife or similar
rubbing alcohol
paper towel
ribbon (optional)

Before you begin any glass etching project, you need to make sure the glass surface is clean and clear. It is best to use rubbing alcohol to clean your surface.

Cutting the vinyl, I used a Cricut Maker. In Design Space I used the Cricut font and typed the two letters I needed with space between them. Before cutting them out, I made sure the height and width fit the front of the shakers.

I centered each letter on the front of the shakers. For this application, I didn’t need to use transfer paper but if your design is more detailed, you will find it helpful. See the video tutorial below for application tips and centering the vinyl.

I applied a generous amount of etching creme to each shaker. There is no need to worry about using too much since it is reusable. Always follow the manufacturer’s directions for use. Etchall works in 15 minutes of application.

Video Tutorial:

With a bit of ribbon added these are ready to fill or give as a gift.

Quick Resin Earrings

Learn how to make quick resin earrings.

These resin earrings almost glow. They were so quick to make. To do so you need the right products and those would be from You-v. They have resin that is non-toxic and cures in less than a minute. I was recently introduced to You-v. and I can tell it is going to change how and when I use resin.

These earrings glow in the light making them hard to photograph and get them in focus. You will have to take my word for it. They are stunning in person.

The links provided are for your use and may contain affiliate links.
They cost nothing for you to use.
Thank you in advance for supporting this site with its use.

Materials:

resin mold
jewelry resin
UV flashlight
transfer film
penknife
cardstock
black permanent marker
jewelry findings
adhesive

Video Tutorial:

To purchase You-v products visit this link [You-v]
and use the discount code TRYIT to save 10% on your order.

Artesprix Giveaway

Enter to win products from Artesprix and try your hand at sublimation.

A Crafty Giveaway

Special thanks to Artesprix for providing the products for this giveaway. One winner will get a 10 pack of Sublimation markers and a Sublimation ink stamp pad in black. Artesprix has a ton of new products arriving soon. These products have slight packaging changes coming but that doesn’t stop these from being great useful products.

The new products arriving in May consist of sublimation colored stamp pads in nine colors, stamp pad refills in those same nine colors, and sublimation paint in red, yellow, blue, black, and white. The white is for mixing and lightening the colors, it does not transfer.

I’ve had early access to these new products because I worked with Artesprix at a recent trade show. There was so much excitement and buzz around the new materials at the Namta Creativation trade show. It was fun working in their booth and talking about the new products as well as testing and demonstrating them. I can’t wait for you to try them. But until then, here is the giveaway.

Enter to Win

a Rafflecopter giveaway

Creatively Crafty Link Party #324

Link up your talent with Creatively Crafty Link Party.

Life Beyond the Kitchen | Try it – Like it – Create it

This week’s Link Party

There are just a few simple rules:

Link to a specific post, not your homepage.
Link up something YOU made/wrote/created.
Giveaways, other link parties, Etsy shops, or business links are not accepted.
Don’t link and run. Try to visit at least one link and show them some love. You may make a new friend.

Birthday SVGs

Celebrate a special birthday with one of these free SVG files.

Free SVG Hop

Celebrate birthdays in style with this free SVG. It’s appropriate for both young and old. Make one for yourself or someone else and let the world know it’s your day. Today I am participating in an SVG blog hop with the theme of birthday. Every design is free to download and use. Check out all the SVGs available at the bottom of this post.

Grab the free SVG file from the store here: [yay day SVG]

Not sure what Cricut tools you need or should use? Check out this post – What tools to Buy.

Need to know about the different vinyl products available? You can learn all about it at About Cricut Vinyl.

Are you confused about the different colors of mats? This article will clear it all up for you.
Which Mat Do I Use?

Check out all the fun and free Birthday SVG files linked below. I am sure you will find a great image for your next birthday celebration.

Happy Birthday Dad Card from Persia Lou
Happy Birthday from We Can Make That
This is My Birthday Shirt SVG from That’s What Che Said
It’s My Birthday Dinosaur from Hello Creative Family
Birthday Squad from The Girl Creative
Birthday Boy/Girl from Life Sew Savory
I am the Gift from Homemade Heather
Yay! It’s My Day from Try it – Like it – Create it
Birthday Royalty from Everyday Party Magazine
Birthday Mode On from Kara Creates
Gamers Level Up from Artsy Fartsy Mama
Birthday Card Cut File from Liz on Call
DIY Baby Monthly Milestones from Weekend Craft

How to Make Button Earrings

How to make fun button earrings.

Making your own button earrings is a fun way to make earrings for a special outfit or event. I made these for my daughters for a recent trip to Disney. They are easy to make and cost-effective. Button earrings also make a great gift.

The links provided are for your use and may contain affiliate links.
They cost nothing for you to use.
Thank you in advance for supporting this site with its use.

Materials:

Wire nippers
adhesive
buttons (mine were found at Walmart)
earring findings
sanding block or nail file

The materials needed are rather simple and you can use a variety of options. For cutting the backs off the buttons I used wire nippers but utility scissors can also work well. If you have a Dremel, that would do the trick. For the adhesive, I used Super Glue Gel. E6000 or a jewelry-making adhesive will also work. To sand the backs a nail file, sanding block, sandpaper, or a Dremel can file down any rough edges. The video tutorial below will show you the simple process.